XII. Interior

    A. Upholstery
        1. Cutout patterns. See drawing.
        2. Start with the seat back. Sew four corners from back side with ½ inch hem.
        3. Turn right-side out
        4. Stuff in foam
        5. Put plywood on top of the foam.
        6. Staple cloth to plywood in center of each of the 4 sides, pulling tight.
        7. Staple about every 1 inch.
        8. Repeat with the bottom.
    B. Seat belts
    C. Battery Box
    D. Seat Bottom
    E. Seat Back